Custom Design EVA Foam Inserts

Custom Design EVA Foam Inserts

 The product is a close-cell,conductive soft foam.It is produced by compounding the PE resin with conductive fillers & blowing agents to extrude certain sheets,then cross-linking and foaming.Sheet being molded,the conductive filler forms conductive channel / network internally,so as to achieve the purpose of static discharge.




Introduction:


1. With conduction path / network inside. excellent anti static performance;

2. It promotes the rapid release of electrostatic without using the environmental humidity. anti-static performance is not

affected by the environmental humidity;

3. Permanent anti-static;

4. Excellent electrical conductivity, surface resistance: 103-109 Ω;

5. Buffer good performance: independent and fine pore closure;

6. High temperature resistance: IXPE maximum temperature 120ºC

7. Chemical resistance: resistant to organic solvents, acids, bases, etc.;

8. No chemical corrosion: It has no corrosion to the components and packaging;

9. Heat insulation, sound insulation, water absorption, moisture;

10. Good processing performance, easy molding. 

Material Specification of IXPE Conductive Foam


1.BasicProcess
    The said product is a close-cell, conductive foam. It is produced by compounding the PE resin with conductive fillers & 

blowing agents to extrude certain sheets,then cross-linking and foaming. The basic process can be summarized to the following:
     1.1 Pellitizing master batch by compounding PE resin with carbon black and AC foaming agents;
     1.2 Extrude the said batch to make certain sheets with different thickness & width;
     1.3 Crosslink the said sheets under electric beam;
     1.4 Make the crosslinked sheets foam in foaming furnac
2..Norminal size
    2.1 Normal size:
           10m×1.2m×8mm; 10m×1.2m×5mm
    2.2 Special size:
    2.2.1 Special thickness such as 25mm, 20mm,15mm and 10mm should be ordered;
    2.2.2 Small length, width and profile product are to be ordered.
3.Rawmaterial

5. Characteristics
    5.1. Excellent ESD effect because its interior conductive lattice;
    5.2. Able to leaking static electricity rapidly and free of environmental humidity;
    5.3. Long time and even Permanent ESD duration(at least 3 years).


Applications in Optoelectronic Industry

  A. Optoelectronic Devices
    1. Active devices: transmitter module, receiver module, transceiver modules, single fiber bi-directional modules;
    2. Diode and components : light-emitting diodes, photodiodes, laser diodes, etc.

  B. LED industry
    1. Display devices : displays , monitors, etc;
    2. Control circuit: control modules, backlight modules, etc;

  C. Optical camera,lens industry
    1. Digital camera with lens, lens, etc ;
    2. Optical communication with grating, filter and so on.
    3. Optical camera ,lens have high demand of cleanliness with requires both ESD and shock protective. Conductive foam is made to solve this.


Our Contacting Details:
Eric Liu (Sales Manager)

Suzhou Sinkery Electronic Technology Co., LTD

Mobile: 0086 13545829192
TEL: 0086 0512-86662375
FAX: 0086 0512-68051703

www.sinkeryfoam.com