Hydraulic oil high pressure filter

Hydraulic Oil High Pressure Filter (SDDFP) 

----up to 660 L/min
---up to 315bar
---material:EN-GJS400-15/steel

1. Technical Specifications
1.1 Filter Housing
Construction
The filter housings are designed in accordance with international regulations. They consist of a filter head and a screw-in filter bowl.

Standard equipment:
*    connection for a clogging indicator
*   two-piece bowl for DFP/F 990 and above (optional for DFP 660 and above)
*   drain screw with pressure relief (standard for DFP/F 330 and above)

1.2    Filter Elements
Max. Allowable D.P.:
BN/HC:20bar   W/HC: 20bar    V: 210bar    BH/HC: 210bar 

2.    Description
Mounting             as pressure oil filter
Temperature range    - 10 u2103 ~ + 100 u2103
Pressure setting of clogging indicator Pa= 5bar -0.5bar (others on request)

Cracking pressure of bypass valve  Po= 6bar+0.6bar (others on request) 

Seals    Nitrile Butadiene Rubber/ NBR (=Perbunan) (HFD liquid)

3.    Notes
* Filter housings must be earthed.
* When using visual clogging indicators, the BM version (visual with manual reset) only should be used.
* When using electrical clogging indicators, the electrical power supply to the system must be switched off before removing the clogging indicator connector.

4.    Application
It can be used for mineral oils, lubrication oils, non-flam fluids, synthetic and rapidly biodegradable fluids.