T-Crystal Dental Zirconia Sintering Furnace Dental Furnace Manufacturer

chamber size

100x100X100mm

Max. temperature

1700 u2103 (<2hour)

Working temperature

800-1600u2103

Temperature controlling

u25cf  PID automatic control via SCR (Silicon Controlled Rectifier) power control with phase angle fired, current limiting resistor.
u25cf  Touch screen panel for Dental Zirconia Sintering Furnace which can store 30pcs different programs
u25cf  Built-in PID Auto-Tune function with overheating & broken thermocouple broken protection.
u25cf  Over-temperature protection and alarm allow for operation without an attendant.

Temperature accuracy

± 1u2103

Temperature Uniformity

± 5u2103

Heating rate

0-40u2103 /min

Thermocouple

B type (Pt-Rh to Pt-Rh) with 99.7% purity Alumina tube

Heating element

U type MoSi2 heating elements

Furnace Chamber

Three layers of ceramic fiber insulation materials
u25cf  First layer: 1800u2103 ceramic fiber board
u25cf  Second layer: 1600u2103 ceramic fiber board
u25cf  Third layer: 1260u2103 ceramic fiber board

Furnace structure

Double layer steel casing with dual cooling fan, surface temperature below 60u2103

Outer dimension

About 410X380X610mm

Working voltage

220V, 50HZ/60HZ, 1 phase (As per your order)

Rated power

1.5KW

Weight

Net Weight: about 58kgs
Gross Weight: about 78kgs

Warranty

u25cf For this Dental Zirconia Sintering Furnace, One year limited warranty with lifetime support. (Consumable parts such as heating elements and crucibles are not covered by the warranty, please order the replacement at related products)
u25cf  ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of One Year Limited Warranty.

Certifications

CE

Application Notes

Using Attentions

u25cf  The cooling rate of this Labsnova dental sintering furnace shall also not exceed 10 °C /min.
u25cf  Toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision.
u25cf  Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.
u25cf  A refractory door block must be inserted before closing the door.