DDW Pneumatic valve gate, self-locking PET Preform injection molding for plastic packing

 

Product Description

PET Preform injection molding for plastic packing&container
Mould material: S136
HS Code:8480790090

Cavity: 48

Runner: Hot

Design software:PROE, UG, CAD, CAM,CAE etc.

Delivery time: 45days

Melissa admin(at)ddwm(dot)com

Product Feature

our PET Preform injection molding adopt the valve gate(shut-off) design, in which each cavity has its own heating zone and temperature is measured by independent thermo couple. So some old traditional problems such as left white marks or drawbench on bottom are easily avoided. Mould is produced automatically to save labor force.

The hardness of components HRC48-HRC50.

Product Specification / Models

the wall thickness difference between is not more than 0.10mm (length<=100mm), weight difference is less than 0.3g; turning center processes make sure that every mould parts can match very well to ensure mould concentricity; Proper distribution of cooling water system improve productivity effect and molding cycle only takes 15seconds.

Other Information

Name:PET Preform injection molding
Description:
Mould material
P20, S136,3Cr13,2316 etc.

Mould base
LKM, HASCO etc
Cavity
multi
Runner
Hot
Design software
PROE, UG, CAD, CAM,CAE etc.

Plastic material
PP, PE, PET etc.
Mould life
2,000,000 shots/cav

Delivery time
30-50days
Specification
Depends on customer's requirements.