DECAL ORGANIC WATER-SLIDE TRANSFER PRINTING PAPER FOR HELMET, METAL CARBON, TOYS-MODEL,SPORT

Product Description

1.New low temperature film-less(none outline film's halo) non-film organic water-slide logo transfer decals, special for coated/none coated metal, carbon composite materials, glass/crystal, ceramic,---. suitable for golf /fishing rods, tennis-rackets, bicycle parts, toys-model, most of metal parts,----.

Samples with customers' registered trademarks, logos and diagrams are for demonstration only and not available for sale.

Product Feature

Options:

1.Soak transfers into water few seconds, place wet transfers on substrates & squeeze to push the bubbles underneath the transferred decals before take off the top clear carrier coat.

2. After taking off the back carrier paper & push out the air bubbles, water, thoroughly then let it air dry or on oven/dryer at low temperature, before clear coating Please be sure use dam rag gently wipe surface to remove the gum of water slide paper.

3.Be sure totally substrates dried, and then spray your protective coating finally if need.

4.This new film-less decal water slide transfers was good adhesion without protective coating when curing at 150 C degree Celsius for 20 minutes.
Samples with customers' registered trademarks, logos and diagrams are for demonstration only and not available for sale.
 

Product Specification / Models

FILM-LESS LOGO WATER-SLIDE DECAL TRANSFER PRINTING PAPER DECAL/IT-FLSTR-W22

Application / Models

1. New film-less(none out line border-halo) type water-slide transfer decals, special for coated/un-coated metal, carbon composite materials, glass, ceramic,---. suitable for toys-model, golf /fishing rod, metal sports goods, tennis rackets, bicycle parts, most of metal parts, glasses, ceramics,----,decorations.

2. Suitable for irregular curved or any difficult printing shape surface, very good durability after final clear coating if need.

3. Options:
Soak transfers into water few seconds, place wet transfers on substrates & squeegee to push the bubbles underneath the transferred decals before take off the top carrier coat. After taking off the carrier & push out the air bubbles, water, thoroughly then let it air dry on oven/dryer at low temperature, before clear coating please be sure use dam rag gently wipe surface to remove the gum of water slide paper. Be sure totally substrates dried, and then spray your protective coating finally. This new low temperature film-less decal water slide transfers was good adhesion without protective coating when curing at 140- 150 C degrees for 20 minutes.

 

Other Information

For difficult printing shape industrial metal coated/uncoated toys-model parts & sport products.