Metal injection molding MIM car sun shed parts

Ignition control lock parts, turbocharger rotors, valve guide parts, automobiles
Code: Accessory Name: Ignition Control Lock Parts, Turbocharger Rotors, Valve Guide Parts, Car Specifications: Various Specifications Drawing Number: Retail Price:: Manufacturing Enterprise Merchant: Friendly Reminder: Please contact the buyer or supplier Please indicate that you read the information from the Auto Parts 110 website, so as not to cause misunderstandings on trust! Union
Introduction: It is manufactured by metal injection molding technology, which is suitable for manufacturing auto parts with complex shapes, high performance requirements, and a weight of less than 300g.
If a good car does not have a brake system, it will soon become scrap iron, so braking is very important. The following editor will talk about which components make up the car brake system.

Tools/Materials
car
Method/Step
1
The brake pedal.

The pedal assembly acts as a lever. After stepping on the brake pedal, the pedal exerts force on the piston of the master cylinder. The pedal is in the cab, and the operation is simple.

What are the components of the automobile brake system?
2
Brake master cylinder.

The brake master cylinder is a hydraulic pump that generates the pressure used for braking and distributes the pressure to the four wheel cylinders through the master cylinder.

What are the components of the automobile brake system?
3
Brake line.

According to the shape of the car, the brake pipeline is also constantly changing. The pipeline is divided into rubber hoses and iron pipes, which are mainly used to transport brake fluid.

What are the components of the automobile brake system?
4
Brake load sensing proportional valve.

The proportional valve is generally located in the rear brake pipeline, and limits the rear brake pressure to change the rear brake situation by sensing the weight of the vehicle. This can also be called mechanical ABS.

What are the components of the automobile brake system?
5
Brake booster.

Boosters are divided into vacuum boosters and hydraulic boosters. Most cars use vacuum boosters to reduce the pedaling force of the driver and increase braking safety.

What are the components of the automobile brake system?
6
Brake fluid.

Brake fluid is a special oil, which is a necessary condition for braking. Brake fluid is corrosive and needs to be cleaned with a lot of water when it gets on the body.

What are the components of the automobile brake system?
7
Brake cylinder and brake pads.

There are brake pumps and brake pads on each wheel. In addition, the brake pads are wear parts, and they must be replaced when they reach a certain level.