auto PET bottle blowing machine

Full - automatic pet stretch blow molding machine is the most stable two-step automatic stretch blow molding machine. It has one to four cavities and the maximum capacity of the products is 1.5 L. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.

auto stretch PET bottle blow molding machine includes four steps as follow:

Step 1 Put the preform into preform container and the conveyer will take the preform to orientation units automatically.

Step 2 Load the preform at neck up to preform holder, and then preform is conveyed into baking tunnel.

Step 3 After heating, preform is conveyed into the blow station, then close the mold, stretch and blow under

Step 4 The finished bottle is taken off by automatic discharging system

Automatic blow molding machine CM-A4 1set



Including:

Automatic main blower;

1set perform unscrambler;

1set low pressure air compressor 1.6m3/min 10kg;

1set high pressure air compressor 2.0m3/min 30kg;

1set air dry 2.0m3/min 30kg;

2sets air filter;

1set air tank 0.6m3/min 30kg;

1set mould chiller;

1set blow mould (4cavities).