Okay Energy Large Oxyhydrogen Generator for Cutting OH1500-OH10000

1.What is oxy-hydrogen generator



Oxy-hydrogen generator is able to separate clean soft water (H2O) into hydrogen and oxygen gases, using a small amount of electric power through a special process. These gases are then mixed and delivered for use in a wide variety of applications, such as heating, brazing, cutting, etc. which currently use LPG or other gas for fuel. When burned, this fuel generates no green house gases or pollutants, and burns at virtually 100% efficiency. This certainly has the potential for becoming the most significant advancement in fuel for the 21st century.



2. Why I used oxy-hydrogen generator



2.1 Maximum Safety

a. Steady, reliable fuel delivery. Fuel is available immediately after machine is switched on. No volatile fuel tanks which can rupture or explode.

b. Multiple safety devices, including overheating and in-sufficient water cut-off switches, will automatically turn off power to ensure the safety of both equipment and user.



2.2 Environmentally Friendly

a. The Fuel generated by our machines burns completely without creating pollutants, toxic fumes, or public nuisance.

b. Does not generate hydrocarbons, carbon monoxide, or carbon dioxide.



2.3 High Mobility

a. Our generators come equipped with wheels to facilitate moving the generators to the job, not the other way around.

b. Our generator immediately generates fuel as needed, eliminating the need for dangerous awkward gas tanks.

c. Fuel can be used for long periods of time without overheating peripheral equipment



2.4 High Temperature & Calorific value

a. Calorific value is 34000Kcal/kg

b. The flame temperature is over 2800u00b0, it can melt refractory metals and none-metals



2.5 Low Cost & Maximum Economy

a. Fuel is generated using only electricity and clean soft water.

b. Both economical and practical when compared to the currently used LPG, Propane, or acetylene.



2.6 Low Heat Dispersal

Use of this fuel provide a more focused heat source with less heat loss, maintaining a more comfortable, safer, lower fatigue working environment.



3.Which fields Okay Energy Oxy-Hydrogen Generator can apply for



3.1 Jewelry Industry:

a. For welding kinds of chain and string made of platinum, gold, silver, copper, stainless steel, etc.

b. For mending tiny sand holes on jewelry casting

c. For jewelry repairing (reforming, casting, welding)



3.2 Electronic Industry:

For welding enameled wire, welding LED wafer, flame-treating circuit board



3.3 Medical Industry:

a. For welding metal fittings and mending sand holes in dentistry

b. No-carbon flame disinfection or glass seal



3.4 Laboratory:

Providing convenient, safe and clean oxy-hydrogen flame



3.5 Organic Glass Industry:

Quick and fine polishing for acryl (organic glass), solving problems that grinding wheel cannot achieve.



3.6 Others:

For welding or heat treating small metal parts, Iron Cutting, Catalytic combustion of other fuels



4.Okay Energy Oxy-hydrogen Generator Technical Parameters:

Model Number: OH1500

AC Voltage Requirement (V): 380

Phase: Three Phase

Power Consumption (kW/h): 4.5

Max. Gas Output (L/h):1500

Max. Working Pressure (kg/cm2): 1.9

Max. Water Consumption (L/h): 0.9

Water Feed: Auto

Dimensions - L*W*H (mm): 1200*800*1200

Gross Weight (kg): 280

Ventilation Space Requirement (mm): 400 in each direction



Model Number: OH3000

AC Voltage Requirement (V): 380

Phase: Three Phase

Power Consumption (kW/h): 9

Max Gas Output (L/h): 2700

Max. Working Pressure (kg/cm2): 1.9

Max. Water Consumption (L/h): 1.8

Water Feed: Auto

Dimensions - L*W*H (mm): 1300*800*1300

Gross Weight (kg): 330

Ventilation Space Requirement (mm): 400 in each direction



Model Number: OH5500

AC Voltage Requirement (V): 380

Phase: Three Phase

Power Consumption (kW/h): 17, adjustable

Max Gas Output (L/h): 5000

Max. Working Pressure (kg/cm2):1.9

Max. Water Consumption (L/h): 2.8

Water Feed: Auto

Dimensions - L*W*H (mm): 1500*800*1450

Gross Weight (kg): 396

Ventilation Space Requirement (mm): 40

Maximum Safety

Environmentally Friendly

High Mobility

High Temperature & Calorific value

Low Cost & Maximum Economy

Low Heat Dispersal

Okay Energy Co., Ltd specializes in research, manufacturing oxy-hydrogen generator, owned many patents.

1) Patented Integration of Water Electrolysis Cell Forming

Our electrolysis cell Integration is used in Large Module in order to make sure no Leakage, Explosion-proof, and Long Life Cycle.

2) Patented Electrolysis Power Supply based SCM

Our Power Supply is special designed for Electrolysis.

For example:

2.1 Constant current control by temperature feedback control

2.2 Current adjust by user to meet the constant flux of oxy-hydrogen gas

2.3 Efficient energy conversion(AC TO DC) based IGBT

2.4 Special cooling design for working 24 hours continues.

3) Patented Multi-layer ANTI-FIRE Water Seal Technology

Water Seal Device is important unit of oxy-hydrogen generator, this unit is designed for backfire-proof, It works 100% ok.

4) Automatic Water Level Detection Technology

We design by ourselves, it used for detect the water level of the electrolysis cell and water -deposit tank. When water is too low, the alert lamp is light. When water is lowest, the power supply switches off to proof the oxy-hydrogen generator.

5) Water Automatic Replenishment Technology

When water of the electrolysis cell is too low, the system will auto pump water from water-deposit tank.

6) High-efficiency Gas Water Separator Technology

This Technology is used to separate the water from gas in order to ensure the gas is pure. If the oxy-hydrogen gas has some water even little, the temperature of the oxy-hydrogen flame will become lower.

7) Electrolyte -Automatic Cycle Technology

We used static way to realize Electrolyte Cycle, don't used pump because the pump is a mechanic unit that is easily damaged.

Cutting characteristics of Oxy-hydrogen gas:

1.Meets different needs of flame such as neutral flame, carbonizing flame and oxidizing flame.

2.Cutting surface smooth & flat, no residue and dregs.

3.Narrow cutting edge, saving material, less heat affected zone and no deformation.

4.No hidden trouble of burning-back, ensure cutting safety

5.Low pollution, environment friendly

6.High economic efficiency, save 70~75% and > 40% investment compares to Acetylene gas and Propane gas.

Range of application

1.Suitable for low, middle carbon steel and low-alloy steel under 300mm.

2.Compatible to manual. Semi-atomistic and automatic cutting machine.



8.Cutting of the marine deck steel

Usually the structural steel used for construction of common strength ship contains carbon at a rate nearly from 0.18% to 0.23%, so this is a kind of low carbon steel. Due to marine deck steel's high thickness and a good adaption to different shapes, most of users prefer to acetylene gas for cutting, but the cutting requirements of marine deck steel (see below) may lead you to make a better choice at a using oxy-hydrogen gas.

1.Oxy-hydrogen pressure must be properly supplied. When pressure is too high, the cutting edge will become wider and coarser. When pressure is low, the ferric oxide slag can not be blown away.

2.Preheating flame's energy rate shall be properly supplied. When pressure is too high, the cutting edge will be melted. If it's too low, the cutting process will be interrupted so the cutting edge is not smooth and flat.

3.The cutting speed should be appropriate. If too fast, it will generate a big lag and will be difficult to cut the plate through. And the iron slag bursts up and is easy to cause backfire, or if too slow, the two ends of the steel plate is easy to melt, and the sparks fly backward or even cause a big deformation and waste the cutting gas at the same time.

4.The cutting torch should keep clean without iron slag on the cutting head. The holes inside cutting head should be specially kept smooth. Since the traditional acetylene gas exists lots of defects like the large energy cost, environment pollution, easy flame disperse, difficult speed control, and unable to give a full guarantee of the cutting quality, the oxy-hydrogen has gradually become an alternative heat resource to replace the acetylene.



Advantages of Applying Oxy-hydrogen Generator to Cut the Marine Deck Steel:

1.No need for low pressure oxygen, an easy control at cutting speed.

2.Smooth cutting edge reflects metallic luster, especially there is no nitridation layer which can have metal put into welding process after cutting

3.No slag on cutting lower edge: The exothermic reaction of the oxygen and iron at cutting can produce extra heat. Meanwhile, it produces FeO slag with a lower surface tension which can improve the fluidity of the metal on cutting edge and produce a smoother surface with no slag and form a smaller cutting edge bevel.

4.The oxy-hydrogen has a smaller heat effective zone which reduces cutting deformation and improves cutting precision.

After-sale service



1. we have gloabal call center to support you , any question will reply soon within two hours.



1) 24 hours hot phone line support.



2) 24 hours email suppoert



3) 24 hours short message or micro-message support.



4) 24hours msn and skype support.



2. the core part of the machine will free change for one years.



3. the others parts will free change for half of years In addition to human damage.