DWJ120-1600-2ply(PLC Cut) Corrugated Cardboard Production Line

Hydraulic Mill Roll Stand

The whole Mill Roll Stand realize clamping, ascending or descending, moving left or right, by 6 sets of hydraulic pressure cylinders. Two work positions, may clamp two scroll at the same time, may load or unload scroll without stop the production. Each Stand with two tracks, two trolleys, one Scroll Direction Changers. Each Stand with American style two rails structure, prevent shaking and weight bias in the course of clamping scroll and conveying:two tracks, two trolleys, one Scroll Direction Changers Each Stand with a whole set of hydraulic station, oil pipes, cylinders. The hydraulic control valves. All in one, easy for install! Might receive the message from the Single facer or the Double Facer (the Glue machine) to move across to left or right.

Auto Splicer

New type, high speed, high efficiency fully automatic.Little order form which is 100 m, can be spliced continuously to 100m/min speed. Reliable sawtooth knife, cut the paper once. With tension force control system.

Fast- change Vacuum Single Facer

Equipped by vacuum structure. Pair of corrugated rollers make one paper sheet into one corrugated paper, agglutinated with another paper sheet into 2ply single Face cardboard. Different flutes needs different pairs of corrugating rollers to make.

Pre-heater, Pre-conditioner

Large heating wrap angle on the barrel could be adjusted in range of 00-3200, is controlled by electro-motion, Germany Design.Polished work surface of heating barrel, Guide Rollers, then plated with hard chrome.New scientific international advanced compression resistance structure, which with bowl-like sides,higher efficiency of heat energy utilizing, much more safe and good-looking. Condensate water is drained by flexible metal hose instead of siphon pipe, the drainage is more thoroughly.Pre-conditioner is equipped with Steam Shower.

Single Layer Span Bridge:

Convey the corrugated single face cardboard by Guide device, Germany structure of conveyor.With 2ply paper guide up device(overhead crane). With strong fences and ladders.At the bottom of the bridge, equipped with relevant illumination, be convenient to operate. The surface of all paper guide rollers is plated with hard chromium.

PLC Rotary Shear Cut-Off and Convey Stacker

SC series single face corrugated cardboard Shearer Cut-off is a new advanced equipment for producing B,E, F.FLUTE single face corrugated cardboard equipped in production line, also can cut base paper(such as white cardboard, kraft paper) into sheets(pieces),

Computer might deposit many order forms specification, and realize change order forms without stop machine. Machine is controlled by PLC automatically. Main Drive is controlled AC Frequency Transducer(inverter), save electric power.

Drive mechanism is equipped with arc shape teeth synchronization belt, long using life, less noise. Cutting Precision of this machine is nice, stable system, low maintenance cost.

It's consisted of slitting section, trans-vers, e cutting section, convey , , and stacking section.

Maximum Mechanical Speed: 120 m/min

Breath: 1600 mm

Flute Type: UV, B1 ,B2 flute mm Height, u00b12 /300mm

1600