Custom Pipe Fitting Plastic Injection Mould , POM PVC PMMA

Custom Pipe Fitting Plastic Injection Mould , POM PVC PMMA



Quick Detail:



1. The part name: pipe fitting (plastic injection mold)

2. Plastic material: PP

3. Cavity material: H13 HRC48-52

4. Mold life: 1000k shots or according to customers quantity condition to decide it with saving cost for our customers.

5. Gate type: Direct gate, sub-gate, fan gate, point gate, edge gate, valve gate, tip gate etc according to our customers requires.

6. Mold base standard: LKM Local standard, DME or HASCO,Customize according to customers' requirements

7. Standard of mold accessories: LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires.

Description:



The part name: pipe fitting

Mold type: Plastic Injection Mould with cold runner system

Part Material: PP

Locating ring Dimension: Dia100

KO Pattern: 200*200

Sprue Radius: SR 19

Mold construction description: Hot runner system, slider, lifter, 2 plate, and 3plate

Ejection type: Pins, Sleeves, Air valve, Stripper Bar, cavity ejection, Stripper Plate, Auto unscrew, Stripper Ring



This product is made of PP plastic material and it is one of the components of the reputable brand pipe fitting. The construction is complicated and there are hydraulic cylinder, hydraulic motors, gear, fan gear, gear-rack in the mold, so it has a very high technical requirement for the mould design. The mould is a cold runner mould with water cooling system and the part can be molded by both automatically and manually.



This part has very high appearance and size requirements, the defect showed below will not be acceptable, for example, weld line, Dark Sport,Sliver Marks,Gas Trap Effect,Visible Ejector Marks,Deformation,Short shot Filling,Burnt Streaks,Sink Marks,Flash,Over dimension,Under dimension,Stress Crack etc. Moreover, the product finishing surface must meet the requires more than SPI-SPE-B1.



This mould is made in Shiny Mould Factory. It is a mould exported to Europe, with complicated structures and high quality requests. Customer needs mold life to be over 1 million shots. We can ensure this mold life and give warrant to our customer that once some mould components are broken during working, if it is caused not by the operation fault from the workers, we can provide new mould components to them free of charge.

Specifications:



1.name

pipe fitting (plastic injection mold)

Plastic material

PP,PE,PA,PC,ABS,PC+ABS,POM,PVC,PMMA,PS,PPO,ASA,TPU,TPR,EVA,PP+GF,PC+GF,

POM+GF,PA+GF,PPT,PET,PETG,SEBS etc.

3.mould base material

S50C,P20,S136 etc

4.cavity material

H13 HRC48-52,S136,420, P20, D2, 1040, 0-1, S-7, A2, 1.2344, 1.2083, 1.2311, 1.2739, 1.2343, 1.2510, 1.2767,NAK80,SKD61,718,738,DF-2 etc

5.mold life

1000k shots or according to customers quantity condition to decide it with saving cost for our customers.

6.cavity number

Single

7.runner

cold

8.gate type

Direct gate, sub-gate, fan gate, point gate, edge gate, valve gate, tip gate etc according to our customers requires.

9.mould weight

380 kg

10. mould base standard

LKM Local standard, DME,HASCO,Customize according to customers' requirements

11.cycle time

8-200 second

12. standard of mold accessories

LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires.

13.design software

Auto CAD ,UG, Pro-E ,Solid Works,Moldflow,etc.

14. File Formats

Auto CAD (DWG), DXF, JPG or JEPG, PDF, Pro-E or Pro/Engineer(DRW,PRT), IGES, STEP,XTL,UG parts etc.

15. injection molding machine

About 120T

16. MOQ

1 set

17. payment

T/T, To be negotiated

18.package

Wooden case or Wooden box with steel frame

19. delivery time(day)

40 T1 according to customers' requirements

20. OEM or ODM

is available

21. mould logo

Based on customer requires

22. after-sales service

one year is warranties

SHINY MOLD management introduction



In order to ensure mold quality, complete customer mold in time and make processing technic and mold structure more reasonable in mold design and manufacture, The company added various review in various stages of mold design and manufacturing, at the same time, we also check everybody on work schedule, work quality, workload, etc, which will greatly mobilize the enthusiasm of the staff work.

1. Making mold progress schedule and evaluation based on standard time node.

2. Making everybody workload based on standard man-hour quota.

3.Work quality evaluation, design and manufacture of abnormal reward and punishment based on our QC record.