car moniotr windbooster racing monitor

car moniotr windbooster racing monitor function

i. Read Driving Parameters



Multi-functional meter can read five types of driving parameters by OBD connector. For VolkswagenAudi specific tables, it can read the turbo



pressure,water temperature, the oil temperature, intake air temperature, speed-up G value; For general tables, it can read the turbo pressure,



water temperature,battery voltage, intake air temperature, speed-up G value. Various parameters display through touching or switching remote



control.







ii. Alarming Function



No matter in which mode the instrument is working, as long as the driving parameters beyond maximum/minimum value, it will alarm through



flashing by the indicator or making a sound by the buzzer.







iii. 0-100MPH Accelerating Test



The measurement rang of 0-100MPH accelerating test is about 20s, and the accuracy is+/-0.1s.







iv. Clear Fault Codes



The instrument can clear car's fault codes by OBD.

Wind Booster Racing Meter can Shutdown Automatically

The instrument communicates with the car through the self-contained OBD plug. After inserting the OBD plug into the original car's OBD diagnostic socket, then the instrument can work normally, no need to connect any other lines. In order to save electricity, the instrument starts after the car launches every time and shut off automatically after firing off. When shutdown, it can shut up manually by touching aluminum ring, no kicking over 30s, it will shutdown automatically.

Suitable for all OBD cars

The picture above is the instrument's working interface. The lower right corner is instrument's functional indicators, according to diffrent tables, there are different ICONS instructions. There, stands for turbine pressure, intake air pressure and air flow instruction. stands for water temperature instruction. stands for oil temperature instruction. stands for battery voltage instruction. stands for intake air pressure. stands for speed-up G value. The icon beside is functional indicator light, which shows the corresponding function when it's lighting. and share a double color indicator, bright redblue indicates the orresponding function. and share a double color



indicator, bright redblue indicates the corresponding function.













ii. Scale Units



Multi-functional meter reads the current parameters by unified scale, ranging from -100 to 200. So for this specific function, the current parameter units



are not identical, default for the following definition,



When it reads turbo pressure/ intake air pressure, the unit is kPa, which is relative pressure value. When it reads air mass flow, the unit is g/s.



water temperature's unit is



oil temperature's unit is ℃；



battery voltage's unit is 0.1V.



intake air temperature's unite is



speed-up G value' s unit is 0.01g



While doing 0-100MPH test, the unit is 0.1s





iii. Remote Control Receiving Window



Remote control receiving window which is a circular hole locates between icon and telepointer, when using remote control operates instrument, do points to the location.









iv. Touching Aluminum Ring



The outer ring of the instrument is aluminum, touching the ring can switch mode.