BLDC Controller

TH-G series BLDC controller is WHEATSTONE company dedicated to an efficient, stable and easy to install the electric vehicle controller design, suitable for electric bicycles, electric motorcycles and electric scooter etc.. The series BLDC controller is able to output a high starting current and supply tight battery current limit. Therefore, it can work in a relatively small battery current conditions, and can provide a good acceleration and climbing ability.

WHEATSTONE BLDC controller uses high power MOSFET high frequency design, the efficiency is up to 99%. Powerful intelligent microprocessor provides a comprehensive and accurate control for the BLDC controller. The user can also connect the computer and the controller through the connecting wires we provide to configure the controller, to guide the test and to obtain the diagnostic information simply and quickly. CAN communication is optional, this is to achieve speed loop.

Technical parameters:

(1) Working frequency: 16.6KHz

(2) Standby current: less than 0.5A

(3) 5V sensor supply current: 40mA

(4) Supply voltage: 84V and 18V~72V

(5) Supply current: 150mA

(6) Working voltage: 18V to 1.25* nominal value

(7) Standard throttle input: 0-5V(Three wire resistance type ),1-4V(HALL type)

(8) Brake analog signal and throttle signal input: 0-5V. Using three wire

resistance type pedal to produce 0-5V signal

(9) Full power operating temperature range: 0u2103~50u2103(Controller shell

temperature)

(10) Working temperature range: -30u2103~90u2103,100 u2103 shutdown

(controller shell temperature)  

(11) Continuous phase current: 60-200A(according to the model)

(12) Peak phase current, 10s: 150-550A(according to the model)

(13) CAN communication is optional

(14) Maximum battery current: adjustable.